Trang

Nhãn

Thứ Tư, 7 tháng 10, 2015

Some Of The Things You Need To Know When Purchasing And Wearing Cheap Neckties

By Sharon Weeks


Don't be wary of "cheap". If you want new and cheap neckties, listen up. You can get good quality if you know what you want. Do you need a certain width or size? Do you want a readymade discount job or an expensive handmade Italian label? What is off the rack at one shop is different from another.

Tie widths come and go; if you want to be in style, find out what is current. 3.75 inches will do nicely. Some larger men like a little extra for proportion, so keep that in mind. Skinny ties are favored by younger men who want to look retro hip. One rule of thumb when shopping is to use a dollar bill to measure your prospective purchase. Fold the bill in half for a three-inch ruler. You can then judge quickly the width of your tie.

It is a matter of what is in style, what is regular (right now it is 3.75 inches), and what looks right. You don't get the same results from an off-the-rack budget item from a not-too-expensive outlet as you do from posh or expensive one. When measuring, try the dollar test. Fold a bill in half and you have a quick three-inch measuring tape.

When it comes to discerning quality, you have to look at fabric and construction. You have no doubt by now measured the width and length and are ready to look more deeply into fabrication. Good ties are made from silk which has a unique sheen and which ties and drapes masterfully. Synthetics just don't have the same ability.

As for construction, good ties are made by folding a piece of silk over on itself. Inside is a good wool blend lining. Fine wool is used on the more expensive ties. In addition, no seams should be showing at any point. You might notice a small horizontal stitch on the back side while you are looking over your prospective purchase. It is done where the wide end splits to form a tip, which in effect is what holds the two sides together. The tie will keep its shape if this detail has been included.

Next you must always go for a good silk, not a synthetic which will not have the same drape or shine. This is not where to cut corners. Even value ties come in pure silk. Then you want to check the lining between the double or triple folds (triple is a superior type of construction found in only the best, probably imported, ties). A thin wool blend is customary as pure wool has become too expensive. It is a sign of quality first and foremost.

As you can see, construction matters and one tie is not as good as another. If you are really after superior quality, look for triple folds of cloth that has been across on the bias. Three panels thus make up the final tie. You can tell by running your finger along the fabric length. You should discern two distinct seams.

Good ties use fabric cut crosswise from a piece of cloth, never straight up and down. In addition, you should not see the various seams. You can feel them as when you are checking for two or three folds and you run your finger lengthwise down the tie. If you feel two seams, you have a winner. Finally, you want a good fit around the neck and a tie that knots easy and hangs smoothly. If you cannot accomplish all of these tasks mentioned above, you should pass on the tie.




About the Author:



Không có nhận xét nào:

Đăng nhận xét

Tổng số lượt xem trang