In this 2-part article, I'm going to detail some general guidelines to help you select the right drumheads that will match your exact requirements.
Drumheads are one of the most important elements of your drum. The type of drumhead that you select will determine the overall sound that your drum will produce. By installing a new drumhead, you can bring a drum "back to life" by adding tone and projection that were lost by using a worn, deteriorated head. You can also improve the sound of a less expensive drum by replacing its stock head with a new, professional-quality one.
Prior to the mid 1950s, drumheads were made of animal hides, like calfskin. This completely changed when the DuPont Company created a polyester film they called Mylar. By employing this plastic film instead of an animal skin, drumhead manufacturers such as Remo and Evans made superb sonic options possible for drummers while adding consistency in quality and tone that wasn't previously attainable. With calfskin heads, drummers had to deal with the frequent need to retune their drums due to weather and temperature fluctuations. Plastic drumheads almost entirely eliminated this inconvenience.
Today, plastic drumheads are utilized not just on drum sets but also on timpani, marching drums, and timbales, as well as hand drums like congas, bongos, djembes, darbukas, frame drums, surdos, pandeiros, doumbeks, tambourines, and caixas.
Number of Plies
The first thing to think about when selecting drumheads for your drum set is head weight. Single-ply heads offer a lively sound with greater resonance and sustain, while 2-ply heads yield a darker, thicker sound with improved durability. If you're a heavy hitter and want a deeper, more controlled tone out of your drum, you may want to go with a 2-ply head. If you're a finessed player and want to hear more overtones, you might use a single-ply drumhead.
(NOTE: There are variations to this approach. For example, you might play heavy rock but prefer the sound that a single-ply head produces. I personally use single-ply heads and hit pretty hard - which means that I need to replace my drumheads more frequently than if I was using 2-ply drumheads.)
Other types of heads include:
Dot - This drumhead features an additional dot-shaped ply (approximate diameter five inches) in the middle. The dot can give you the durability of a 2-ply head, but with a sound more like that of a single-ply head because only 1 layer of plastic sits on the drum's bearing edge. Drumhead companies like Remo, Evans, Aquarian, Ludwig, and Attack all produce their own versions of a head featuring a reinforcement dot.
Three-ply - Aquarian recently launched a 3-ply head for players who require the ultimate in durability. Obviously, this head produces an extremely dark and lower fundamental pitch.
Next week in Part 2, I'll go over drumhead muffling, coating, and bottom drumheads. In the meantime, should you have any questions or need specific feedback regarding your drumhead decisions or dilemmas, feel free to reach out. I'm always here to help!
Drumheads are one of the most important elements of your drum. The type of drumhead that you select will determine the overall sound that your drum will produce. By installing a new drumhead, you can bring a drum "back to life" by adding tone and projection that were lost by using a worn, deteriorated head. You can also improve the sound of a less expensive drum by replacing its stock head with a new, professional-quality one.
Prior to the mid 1950s, drumheads were made of animal hides, like calfskin. This completely changed when the DuPont Company created a polyester film they called Mylar. By employing this plastic film instead of an animal skin, drumhead manufacturers such as Remo and Evans made superb sonic options possible for drummers while adding consistency in quality and tone that wasn't previously attainable. With calfskin heads, drummers had to deal with the frequent need to retune their drums due to weather and temperature fluctuations. Plastic drumheads almost entirely eliminated this inconvenience.
Today, plastic drumheads are utilized not just on drum sets but also on timpani, marching drums, and timbales, as well as hand drums like congas, bongos, djembes, darbukas, frame drums, surdos, pandeiros, doumbeks, tambourines, and caixas.
Number of Plies
The first thing to think about when selecting drumheads for your drum set is head weight. Single-ply heads offer a lively sound with greater resonance and sustain, while 2-ply heads yield a darker, thicker sound with improved durability. If you're a heavy hitter and want a deeper, more controlled tone out of your drum, you may want to go with a 2-ply head. If you're a finessed player and want to hear more overtones, you might use a single-ply drumhead.
(NOTE: There are variations to this approach. For example, you might play heavy rock but prefer the sound that a single-ply head produces. I personally use single-ply heads and hit pretty hard - which means that I need to replace my drumheads more frequently than if I was using 2-ply drumheads.)
Other types of heads include:
Dot - This drumhead features an additional dot-shaped ply (approximate diameter five inches) in the middle. The dot can give you the durability of a 2-ply head, but with a sound more like that of a single-ply head because only 1 layer of plastic sits on the drum's bearing edge. Drumhead companies like Remo, Evans, Aquarian, Ludwig, and Attack all produce their own versions of a head featuring a reinforcement dot.
Three-ply - Aquarian recently launched a 3-ply head for players who require the ultimate in durability. Obviously, this head produces an extremely dark and lower fundamental pitch.
Next week in Part 2, I'll go over drumhead muffling, coating, and bottom drumheads. In the meantime, should you have any questions or need specific feedback regarding your drumhead decisions or dilemmas, feel free to reach out. I'm always here to help!
About the Author:
Vic Salazar is the proprietor of Vic's Drum Shop, an internationally famous drum and percussion store in Chicago, Illinois. The vast knowledge of drum gear that he's accumulated over his forty year career has made Vic a valuable resource for beginning drummers, drumming hobbyists, professional drummers, and many of the world's top drum superstars.
Không có nhận xét nào:
Đăng nhận xét